JW Fishers SeaOtter-2, Руководство по эксплуатации

Страница: 9 / 29

9
Control Box Control Panel:
Control Box:
(continued)
The Control Panel contains all the necessary
switches and indicators to control and monitor the
SeaOtter-2.
115 to 120 vac (only)
input power plug
Power Area:
115-120 vac input power - from generator or ships power. For safety, be sure to plug into a “ground
fault breaker”. If operating from for 220 vac, be sure to use a stepdown transformer (220 to 120 vac).
• Fuse - 10 amp main fuse. All power goes through this fuse. When open removes power from the
system.
• Power on switch - Applies power to the system. All power goes through this switch.
• Power on LED - Illuminates when power is on.
• 120 vac outlets - Can be used to power a second monitor or recorder.
• 120 vac input power plug - Power cord (supplied) plugs into this connector and power is
supplied to the system.
10 amp fuse
Power on switch
Power on LED
120 vac outlet
Horizontal
Motor Power
Master
Motor Switch
Vertical
Motor Power
Vertical
Motor Trim