9
SYSTEM COMPONENTS
Signals from the scanning head travel up the cable to the Sonar Processor on the surface. The
signals are processed and sent to the PC where the signal is displayed and recorded. The boat’s GPS
receiver can also be connected to the Sonar Processor. If connected, the boat’s Latitude and
Longitude will be displayed and recorded by the PC.
cable to surface
Sonar
Processor
12345
12345
12345
12345
PC (customer supplied)
Boat’s
GPS
USB Port
The Sonar Processor can be powered by 9 - 12 vdc. A 120/220 vac to 12 vdc wall transformer is
supplied to power the system from a 120/220 ac voltage supply. A cable with battery clips is
supplied to power the sonar from a 12 volt battery.
Wall Transformer
Cable for 12 v battery
Transducer Head and
Electronics
The Sonar Processor connect to any available USB port on the PC. (Note: It is best to use the
same physical USB port every time you operate)
Содержание SCAN-650
Страница 10: ...10 LEFT BLANK...