33
CONNECTING THE CABLES (PC-CARD or PCI for Desktop PC)
The drawing below shows the cable connections between the Scanning Head,
the Sonar Processor, the boat’s GPS system, and the PC. See pages 9 and 10 of this
maual for a description and picture of each of the cables.
cable to surface
Sonar
Processor
12345
12345
12345
Scanning Head
and
Electronics
PC (customer supplied)
Interface
Board
Boat’s
GPS
Serial
or
USB Port
Interface Cable for Laptop PC
Interface Cable for Desktop PC
Step 3.
Attach the cable that connects the Sonar Processor to the Serial or USB port of the computer.
See picture below. If your computer has a Serial port then only the leftmost cable is used. If your
computer has USB ports (no serial ports), then the cables are plugged together and both cables
are used. The rightmost cable converts the Serial cable to a USB cable. If using this cable see
the Appendix in the back of this manual for instructions on using the Serial to USB adapter.
28
Step 1.
Attach the long cable that connects the Scanning Head to the Sonar Processor. CAUTION:
Make sure the O-ring is inside the submersible connectors on the Scanning Head cable.
Step 2.
Attach the interface cable that connects the Sonar Processor to the Interface board (see page 21
of this manual for instructions on installing the interface board).
Содержание SCAN-650
Страница 10: ...10 LEFT BLANK...