JVC VR-X1600U, Инструкция по эксплуатации

Страница: 111 / 204

105
Scheduling and Archiving
䢇
: Initial value
Output Control on Event
Output on
Event Activate output
on event Event
^
Set the combination of set events and outputs.
Output
^
Configure events I/O input events
Manual events
Generic events
Select an event and click [Open] to display the
settings screen for the selected event.
Configure Output...
^
Display the output settings screen (
A
Page 103
"Hardware Output").
Item Preset Values Description
Item Preset Values Description
Scheduling All Cameras (
A
Page 119)
Schedule all cameras For specifying options for Online, Speedup, Send e-
mail/SMS, and PTZ patrolling schedule for each
camera.
Note:
●
This unit does not support notifications by SMS.
Online
䢇
Always off
Always on Speedup
E-mail
SMS
PTZ Patrolling
䢇
None
Apply Template (for each camera) Select check box
䢇
Do not select check box
Select this check box to use a template when you
configure settings for each camera.
Scheduling Options
Scheduling options Start cameras on
client request Select check box
䢇
Do not select check box
Select this check box to start the camera on request
from the viewer.
Schedule profile
for new cameras Always off
Always on
For specifying the default schedule value applied to
any new camera added.
●
Default value varies depending on the camera.
Hardware device
communication Maximum delay
between reconnect
attempts
䢇
10 For specifying the maximum delay for reconnect.
Restore Default
^
Reset the maximum delay time for reconnection.
Archiving
Archiving time
䢇
12:00:00 For specifying the archiving time.
Archive failure
notification Send e-mail on
archive failure
䢇
Select check box
Do not select check box
Select this check box to send an e-mail when any
failure occurs during archiving.
Send SMS on
archive failure
䢇
Select check box
Do not select check box
Note:
●
This unit does not support notifications by SMS.