JVC VR-X1600U, Инструкция по эксплуатации

Страница: 109 / 204

103
Events and Output
䢇
: Initial value
Item Preset Values Description
Ports and Polling
Ports and
polling Alert and generic event port 1 to 65535
䢇
1234
For specifying a port number to handle a warning
triggered by an event, such as a generic event.
SMTP event port 1 to 65535
䢇
25
For specifying a port number to send event
information from a device to the monitoring
system via SMTP.
FTP event port 1 to 65535
䢇
21
For specifying a port number to send event
information from a device to the monitoring
system via FTP.
Polling interval [1/10] second
䢇
10 (1 sec) For some devices, the monitoring system must
check the status of device input port to detect
whether or not the input has been received. Such
regular status check is referred to as “polling.”
●
For I/O devices, set the polling interval as
short as possible.
●
For devices that require polling, refer to the
relevant instruction manuals for I/O devices.
Hardware Input Events (
A
Page 48)
(Hardware
Device name) Event
configuration Enable event
䢇
Select check
box
Do not select
check box
Select this check box to use the event function.
Note:
●
The following setting items vary depending on
selected events.
Event name For specifying an event name.
●
The following characters cannot be used. < > & ' " \ / : * ?
|
[ ]
Pre/post alarm
images Images from
camera
^
For selecting cameras to acquire images.
Number of pre-
alarm images
䢇
3 For specifying the number of images to acquire.
Frames per
second
䢇
1 For specifying the number of image frames.
E-mail
notification Send e-mail if
this event
occurs Select check box
䢇
Do not select
check box
Select this check box to send an e-mail when an
event occurs.
Attach image
from camera Select check box
䢇
Do not select
check box
Select this check box when you attach an image
to the e-mail, and select an image source by
using the pull-down menu.
SMS notification Send SMS if
this event
occurs Select check box
䢇
Do not select
check box
Note:
●
This unit does not support notifications by
SMS.
System motion
detection event Create a
system motion
detection event
for the camera Select check box
䢇
Do not select
check box
Select this check box when you create an event
to be triggered by motion detection.
Hardware Output (
A
Page 56)
(Hardware
Device name) Output Settings Output name For specifying a name for the output.
●
The following characters cannot be used. < > & ' " \ / : * ?
|
[ ]
Output
connected to For selecting which destination to connect the output to.
Keep output for For specifying the output holding time in units of 1/10 seconds or
seconds.
Test Output Click this to perform a test on the output settings.