JVC VR-X1600U, Инструкция по эксплуатации

Страница: 65 / 204

59
6
Specify units of seconds to record before/after
the occurrence
7
Click [OK]
Note:
●
A group of images before/after any motion/event is called
a sequence.
●
For how to use a sequence, refer to "Searching from the
Image List" (
A
Page 147) "Searching for Recorded
Images" (
A
Page 149).
Any abnormality in this unit or monitoring system can be
notified through e-mail.
Use 2 windows to configure mail settings.
䢇
Notifications related to hardware
●
Formatting of built-in HDD
●
Formatting of external HDD
●
Deterioration of built-in HDD reliability
●
RAID abnormality (if applicable)
●
Detection of heat radiation stoppage
䢇
Notifications from Management Application or
Smart Client
●
Motion detection
●
Event occurrence
●
Disconnection and restoration of communication with
cameras
●
Archive error occurrence
Mail Settings of Unit Setting
1
Double-click [4. Unit Setup] on the desktop
The [Unit Setting] window appears.
Item Description
Enable pre-recording
To record images before any
motion/event, select this check
box and enter units of seconds
for recording.
Enable post-recording
To record images after any
motion/event, select this check
box and enter units of seconds
for recording.
Configuring Mail Settings