48
ENGLISH
Settings
Settings
<Device Name>
Display/change the device name to be shown on the
Bluetooth device. (Page 35)
<PIN Code>
Change the PIN code of the unit. (Page 35)
<Device Address>
Display the device address of the unit.
<TEL SETUP>
Configure the setting for using a Bluetooth mobile
phone. (Page 39)
Security settings
Display the <Security> screen.
On the Home screen, touch as follows:
Then, on the
<SETUP>
screen, touch
[Security]
.
<Security Code Set>
Register the security code for the unit. (Page 4)
<Security Code Cancellation>
Clear the security code. (Page 4)
<Security Code Change>
Change the security code. (Page 4)
Remote Controller
Remote Controller
Remote controller RM-RK258 is supplied for
KW-V640BT Region 4
.
• For
KW-V640BT Region 1
: To use the remote
controller, purchase optional remote controller,
RM-RK258.
Refer to the instruction manual supplied with the
remote controller.
• For
KW-V640BT Region 4
: The unit is equipped
with a steering wheel remote control function.
(Page 45)
–
See page 54 for connection.
–
Operations may differ depending on the type of
steering wheel remote control.
RM-RK258
Preparation
Removing the battery sheet
Pull the battery sheet out from the remote controller
to activate the battery.
Changing the battery of the remote
controller
CR2025 (+side)
• Use a commercially available button battery
(CR2025).
• Insert the battery with the + and – poles aligned
properly.
–
If the effectiveness of the remote controller
decreases, replace the battery.
CALIFORNIA, USA ONLY
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material — special
handling may apply. See <www.dtsc.ca.gov/
hazardouswaste/perchlorate>.
EN̲KW-V2018TC̲KR.indb 48
EN̲KW-V2018TC̲KR.indb 48
2017/12/04 9:41
2017/12/04 9:41