ENGLISH
31
SETTINGS
Category Menu items
Selectable settings, [reference page]
Audio
Subwoofer
•
LPF/Level
•
Phase
: Press
4
/
¢
to select the cutoff frequency to the
subwoofer.
Off:
All signals are sent to the subwoofer.
LPF 55Hz/LPF 85Hz/LPF 120Hz:
Frequencies higher than
55 Hz/85 Hz/120 Hz are cut off.
Turn the control dial to adjust the subwoofer output level.
Level 00
to
Level 08
(Initial:
Level 04
)
: Turn the control dial to select the subwoofer phase.
0deg
(normal) or
180deg
(reverse)
HPF
High pass filter
Select the cutoff frequency to the front/rear speakers. Set this to match the LPF
settings.
•
62Hz/95Hz/
135Hz
•
Off
: Frequencies lower than 62 Hz/95 Hz/135 Hz are cut off.
: All signals are sent to the front/rear speakers.
Beep
Key touch tone
•
On
•
Off
: Activates the key touch tone.
: Deactivates the key touch tone.
Amplifier
Gain
*
7
•
High Power
•
Low Power
•
Off
: Vol 00 – Vol 50
: Vol 00 – Vol 30 (Select if the maximum power of each speaker
is less than 50 W to prevent damaging the speaker.)
: Deactivates the built-in amplifier.
Display
Dimmer
•
On
•
Off
•
Auto
•
Time Set
: Dims the display and button illumination.
: Cancels.
: Dims the display when you turn on the headlights.
*
8
: Set the timer for dimmer, [35].
Any hour – Any hour (Initial:
06PM–07AM
)
Level Meter
•
Meter 1
•
Meter 2
: Select the different level meter patterns, [4].
• Press DISP to show the selected level meter.
*
7
The volume level automatically changes to “Vol 30” if you change to <
Low Power
> with the volume level set
higher than “Vol 30.”
*
8
The illumination control lead connection is required. (See “Installation/Connection Manual.”)
Continued on the next page
EN30-37_KD-R900[J]f.indd 31
EN30-37_KD-R900[J]f.indd 31
2/19/09 9:29:58 AM
2/19/09 9:29:58 AM