Masterpage:Right-No-Heading
EN
67
Filename [XVC28US_11Trouble.fm]
Page 67
8 December 2004 8:18 am
MP3/JPEG Files Playback (DVD deck)
RECORDING (VCR deck)
TIMER RECORDING (VCR deck)
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. A disc cannot be played.
●
No MP3/JPEG files are recorded to the
disc.
Replace the disc.
●
Files do not have the correct file
extension in their file names.
Add correct file extension (.mp3, .MP3,
.jpg, .jpeg, .JPG, .JPEG, or any uppercase
and lowercase combination) to their file
names.
●
Files are not recorded in a format
compliant with ISO 9660.
Replace the disc. (Record files using a
compliant application.)
●
The different types of files are recorded
to the disc.
The disc which contains the different types
of files may not be played because of its
disc characteristics or recording
conditions.
2. When playing back a disc which
contains both MP3 files and JPEG files,
either MP3 files or JPEG files are
played.
●
When playing back a disc which
contains both MP3 files and JPEG files,
the selected files in the “FILE TYPE”
setting are played back .
Set “FILE TYPE” to either “AUDIO” (for
MP3 files) or “STILL PICTURE” (for JPEG
files) which you want to play back
beforehand. (
墌
pg. 62)
3. The control display appears on the TV
screen, but no operation can be
performed.
●
No MP3 files or JPEG files are recorded
to the disc, or the disc is an unplayable
disc (such as CD-ROM).
Replace the disc. (
墌
pg. 8)
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. Recording cannot be started.
●
There is no cassette loaded, or the
cassette loaded has had its record safety
tab removed.
Insert a cassette, or using adhesive tape,
cover the hole where the tab was
removed.
2. TV broadcasts cannot be recorded.
●
“F-1” has been selected as the input
mode.
Set to the desired channel.
3. Tape-to-tape editing is not possible.
●
The source (another video recorder,
camcorder) has not been properly
connected.
Confirm that the source is properly
connected.
●
All necessary power switches have not
been turned on.
Confirm that all units’ power switches are
turned on.
●
The input mode is not correct.
Set the input mode to “F-1.”
4. Camcorder recording is not possible.
●
The camcorder has not been properly
connected.
Confirm that the camcorder is properly
connected.
●
The input mode is not correct.
Set the input mode to “F-1.”
5. “
䡬
” and “
$
” on the front display
panel won’t stop blinking.
●
The end of the tape was reached during
recording.
The program may not have been recorded
in its entirety. Next time make sure you
have enough time on the tape to record
the entire program.
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. Timer recording won’t work.
●
The clock and/or the timer have been set
incorrectly.
Re-perform the clock and/or timer
settings.
●
The timer is not engaged.
Press
TIMER
and confirm that “
#
” is
displayed on the front display panel.
2. Timer programing is not possible.
●
Timer recording is in progress.
Timer programing can’t be performed
while a timer recording is in progress.
Wait until it finishes.
XVC28US_01.book Page 67 Wednesday, December 8, 2004 8:22 AM
