Masterpage:Right-Full-NoTitle0
EN
75
Filename [HDS1EU_5.fm]
Page 75
June 21, 2001 7:15 pm
HDD SET UP
* The default setting is
bold
in the table below.
VCR SET UP 1
* The default setting is
bold
in the table below.
8
LIVE MEMORY
OFF
30MIN
1HR
3HR
When this function is set to “30MIN”, “1HR” or “3HR”, you can enjoy the
selected length of the time for “Live Memory Playback” (
墌
pg. 26).
8
AUDIO REC
NICAM
MONO
When this function is set to “NICAM”, the NICAM audio programme will be
recorded.
When this function is set to “MONO”, the Standard (monaural) audio
programme will be recorded.
NOTE:
This function works only on the NICAM bilingual programme.
8
NAVIGATION
ON
OFF
When a programme is recorded on the cassette with this function set to “ON”,
you can use VCR Navigation (
墌
pg. 32, 51).
8
S-VHS
AUTO
OFF
Your recorder can record in S-VHS (Super VHS), S-VHS ET or VHS.
●
To record in S-VHS:
Set “S-VHS” to “AUTO”. Then, insert a cassette marked “S-VHS”. The S-VHS
indicator lights up on the front display panel.
The S-VHS recording mode is selected.
●
To record in S-VHS ET on a VHS cassette:
See “Super VHS ET (S-VHS ET)” on page 39.
●
To record in VHS:
Insert a cassette marked “VHS”.
If the S-VHS ET mode is activated, press
S-VHS ET
. “S-VHS ET : OFF“ appears
on the TV screen, if “O.S.D.“ is set to “ON“.
The VHS recording mode is automatically selected regardless of the “S-VHS”
mode setting.
●
To record in VHS on an S-VHS cassette:
Insert a cassette marked “S-VHS”. The S-VHS indicator lights up on the front
display panel. Then, set “S-VHS” to “OFF”. The S-VHS indicator goes off.
The VHS recording mode is selected.
NOTE:
When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS
indicator lights up on the front display panel regardless of the “S-VHS” mode setting.
HDS1EU_5.fm Page 75 Thursday, June 21, 2001 7:16 PM
