Masterpage:Left-FullCol
78
EN
Filename [HDS1EU_5.fm]
Page 78
June 21, 2001 5:32 pm
SUBSIDIARY SETTINGS (cont.)
VCR SET UP 2 (cont.)
* The default setting is
bold
in the table below.
FUNCTION
* The default setting is
bold
in the table below.
8
VIDEO STABILIZER
ON
OFF
When this function is set to “ON”, you can automatically correct vertical
vibration in the picture when playing back unstable recordings made on
another recorder.
NOTES:
●
When you finish viewing a tape, be sure to set this function to “OFF”.
●
Regardless of the setting, this function has no effect during recording and during special
effects playback.
●
The on-screen display may jitter vertically when this function is set to “ON”.
●
To watch recordings with close-caption, set this function to “OFF”.
●
Video Stabilizer and Digital TBC/NR cannot be used at the same time. If you activate
Digital TBC/NR when “VIDEO STABILIZER” is set to “ON”, Video Stabilizer will be
automatically turned “OFF”.
8
O.S.D.
ON
OFF
When this function is set to “ON”, various operational indicators appear on the
TV screen. Messages appear in the selected language (
墌
pg. 17, 18).
NOTES:
●
When you use this recorder as the source player for editing, be sure to set “O.S.D.” to
“OFF” before starting.
●
During playback, the operation mode indicators may be disturbed depending on the
type of tape being used.
8
AUTO TIMER
ON
OFF
When this function is set to “ON”, the timer is automatically engaged when the
recorder power is turned off, and automatically disengaged when the recorder
is powered back on.
NOTE:
For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions are disabled
while the Timer mode is engaged. To disengage the timer, press
#
(TIMER).
8
DIRECT REC
ON
OFF
When this function is set to “ON”, you can easily start recording the
programme that you are watching on your TV. Press and hold
7
and press
4
on
the remote control, or press
7
on the recorder.
NOTES:
●
When you use the Direct Rec function, be sure to use a TV offering T-V LINK, etc. and
connect a fully-wired 21-pin SCART cable between the recorder and the TV
(
墌
pg. 12).
●
If “DIRECT REC” is set to “OFF”, the
7
button functions as described in “Basic
Recording” (
墌
pg. 22, 30).
●
During the Direct Rec, “– –” appears on the front display panel.
●
If a programme is recorded with the Direct Rec, the station name will not be registered
for the Navigation. “– – – –” will be displayed for the station name.
●
Retake function (
墌
pg. 38) does not work during Direct Rec.
●
Even if there is no power supply for more than 60 minutes, the recorder keeps the
setting.
●
If you use the remote control of your TV to record the programme with the Direct Rec,
the programme will be recorded on the HDD deck, even if you select the VHS deck. In
this case, first few seconds of the programme will not be recorded.
HDS1EU_5.fm Page 78 Thursday, June 21, 2001 5:32 PM
