Masterpage:Right-NoTitle0
EN
63
Filename [HDS1EU_4.fm]
Page 63
June 21, 2001 12:29 pm
B
Select the recording deck.
Press
HDD
or
S-VHS
.
C
Set the recorder’s input mode.
Press
AUX
(
number key
“
0
”) and/or
PR
to select “F-1”.
●
Set “F-1 INPUT” to “VIDEO” for the VIDEO input connector,
or “S-VIDEO” for the S-VIDEO input connector, depending on
the connector being used (
墌
pg. 65).
D
Set the edit mode. (VHS deck only)
See “PICTURE CONTROL” on page 77.
E
Start the camcorder.
Engage the Play mode of the camcorder.
F
Start the recorder.
Engage the Record mode of the recorder.
NOTES:
●
All necessary cables can be obtained from your dealer.
●
When you select “EDIT” to dub tapes in step
D
, be sure to
select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)
after you finish dubbing the tapes.
●
For HDD deck, the recording pause takes effect only when the
recorder is recording on the HDD deck with the channel set to
“L-1”, “F-1”, or “DUB”. The recording pause is released in 5
minutes automatically. Picture and sound may be distorted at
the point where the recording pause is released.
HDS1EU_.book Page 63 Thursday, June 21, 2001 12:30 PM
