JVC DR-MV1, Инструкция по эксплуатации

Страница: 41 / 104

Masterpage:Right+
EN
41
Filename [DR-MV1SE_06DVD Operation2.fm]
Page 41 March 11, 2004 8:55 pm
OPERATIONS ON DVD DECK
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the unit off after
recording is finished.
1
Press
7
on the unit to start recording.
2
Press
7
again to engage the ITR mode.
●
On the front display panel, “0:30” appears.
3
If you want to record for more than 30 minutes, press
7
to
extend the time. Each press extends recording time by 30 minutes.
NOTES:
●
You can only perform ITR using the 7 button on the unit.
●
If “DIRECT REC” is set to “ON”
(
墌
pg. 81)
, Instant Timer Recording
(ITR) does not work.
●
When the recording capacity becomes full during timer recording or
Instant Timer Recording, the unit is automatically shut off.
Watch Another Programme While Recording On The
Unit
While recording is going on, you can watch another programme on
the TV by using the TV’s tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV
in advance. (
墌
pg. 74)
1
During recording, press TV/VCR to select TV mode if your unit
is connected to the TV via the RF connection.
●
VCR mode is disengaged, then the VCR indicator lights off and “TV”
appears on the front display panel.
●
The programme received on the TV’s tuner is displayed on the TV
screen.
2
Slide the TV/CABLE/SAT/DVD switch to TV .
3
Press PR +/– repeatedly to select the desired channel.
NOTE:
If a decoder is connected to the unit (
墌
pg. 77), you can select a
scrambled channel as well as other normal channels.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
●
Each time you press DISPLAY , the time indication changes as
follows:
Elapsed recording time
]
Disc remaining time
]
Clock
]
(Back to
the beginning)
●
There is another way to check the disc remaining time. While the unit
is stopped or recording is in progress, press
REMAIN . The list of disc
remaining times for all recording modes appears on the TV screen.
Recording Features
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD .
●
Press VCR/DVD repeatedly so that the DVD lamp lights up on the
unit.
1
4
7
2
5
8
0
3
6
9
PR +/–
DISPLAY
REMAIN
TV/VCR
SAT
7
VCR indicator lights off.
DR-MV1SE_06DVD Operation2.fm Page 41 Thursday, March 11, 2004 8:57 PM