JVC DR-MV1, Инструкция по эксплуатации

Страница: 26 / 104

Filename [DR-MV1SE_05DVD Operation1.fm]
Masterpage:Left+
26
EN
Page 26 March 11, 2004 7:27 pm
OPERATIONS ON DVD DECK
Still Picture/Frame-By-Frame Playback
1
Press
9
to pause during playback.
2
Press
9
or
w e
to activate frame-by-frame playback.
●
Each press of
9
advances the still picture frame by frame.
●
Each press of
w e
advances/reverses the still picture frame by
frame.
●
Frame-by-frame playback for reverse direction cannot be performed
with Video CD/SVCD discs.
●
To resume normal playback, press
4
.
Slow Motion
1
Press
9
to pause during playback.
2
Press SLOW – (
3
) or SLOW + (
5
).
●
Each press of SLOW – (
3
) or SLOW + (
5
) increases the slow
motion speed for each direction (from 1/16 to 1/2 times the normal
speed).
●
Slow motion for reverse direction cannot be performed with Video
CD/SVCD discs.
OR
Press SLOW – (
3
) or SLOW + (
5
) for 2 or more seconds.
Skip Search
During playback, press .
●
Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
Resume Function
It is possible to memorize the position where you stop playback
and resume playback from that position.
●
Be sure to set “RESUME” to “ON” or “DISC RESUME”. (
墌
pg. 79)
1
Press
8
during playback to memorises a resume point.
●
The unit enters Resume Stop mode and memorises the position
where you have stopped playback as a resume point. (The inside of
the disc status indicator on the front display panel blinks while
memorising.)
●
The unit retains a memory of the resume points of the last 30 discs
played back, even though they have been ejected if “RESUME” is set
to “DISC RESUME”. (
墌
pg. 79)
●
To clear the resume points:
(The inside of the disc status indicator stops blinking and lights.)
When “RESUME” is set to “ON”:
• Press
1
to turn off the unit.
• Press
x
to take out the disc.
• Press
8
in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by selecting
an item, etc.
When “RESUME” is set to “DISC RESUME”:
• Set “RESUME” to “OFF”. (
墌
pg. 79)
• Press
8
in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by selecting
an item, etc.
2
Press
4
in stop mode to resume playback. The unit starts
playback from the resume point.
NOTES:
●
“DISC RESUME” setting works on DVD VIDEO, VCD, SVCD and
already finalised DVD-R/DVD-RW (video mode) discs. For other
types of discs, the function under “ON” setting will be applied even if
“RESUME” is set to “DISC RESUME”. (
墌
pg. 79)
●
If you stop the playback of a disc for which an resume point has
already been memorized, the memory will be updated with the new
resume point.
●
After the unit has memorized the resume point for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorized point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
●
When the unit memorizes a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
●
This function may not work for some Video CD/SVCD.
●
When “RESUME” is changed to “ON” or “OFF” (
墌
pg. 79), resume
points of the discs memorized with “RESUME” set to “DISC
RESUME” will be cleared.
●
Resume points are memorized for each side of a double-sided disc.
1
4
7
2
5
8
0
3
6
9
MENU
SLOW+ (
5
)
SLOW– (
3
)
4
9 8
MARK
2 6
ANGLE
REMAIN
REMAIN
SUBTITLE
rtw e
ENTER
SAT
DR-MV1SE_00.book Page 26 Thursday, March 11, 2004 7:28 PM