JVC Connected Cam GY-HC900CHE, Инструкция по эксплуатации

Страница: 35 / 236

Attaching/Detaching the Battery (E Model)
Use the following battery type.
0
V Mount
1 Attach the battery.
Face the terminal downward and attach the V
mount of the battery onto the V mount
attachment bracket of the camera recorder.
2 Press down the battery until it snaps into
place.
.
V Mount
V Mount
Attachment Bracket
3
Detaching the Battery
Press down the release lever and slide the
battery upward to detach it from the camera
recorder.
.
Battery
Release Button
Precautions for Batteries
0
Store the battery in a cool and dry place when
not in use. Do not expose the battery to high
temperatures (such as in a car under direct
sunlight). This will cause battery leakage and
shorten the battery life.
0
Operating time is shortened if the battery
terminal is dirty.
0
If the operating time shortens drastically even
after charging, the battery may be reaching the
end of its life. Replace the battery with a new
one.
Battery Warning Settings
Follow the steps below to configure the warning
voltage or warning level when the remaining
battery level is running low.
1 Select “Voltage” or “Capacity%” in
[System]
B
[Battery]
B
[Type]
0
“Near End (V)” and “End (V)” are enabled
when “Voltage” is selected.
0
“Near End (%)” and “End (%)” are enabled
when “Capacity%” is selected.
2
Configure “Near End” and “End”
0
Configures the setting at which the power is
shut down automatically after the warning is
activated.
(
A
P149 [ Near End (V)
0
] )
(
A
P149 [ End (V)
0
] )
(
A
P149 [ Near End (%)
2
] )
(
A
P149 [ End (%)
2
] )
3
Check in advance to ensure that the
connected battery is in order and the
settings are appropriate
0
If the time is different from what has been
anticipated, repeat the steps in 2 and 3.
Memo :
0
When the battery that is connected does not
support communication, “Near End (V)” and
“End (%)” are enabled even when “Capacity%”
is selected.
Power Supply
35
Pr
ep
ar
ati
ons