Return Input
0
For selecting the input destination of the return
video.
0
Network:
For inputting the return video from the
preconfigured network.
0
SDI:
Inputs return video from the [HD/SD SDI IN]
terminal.
[Setting Values: Network,
R
SDI]
Return Aspect
For selecting the aspect ratio of the return video.
0
16:9:
Select this option if the return video is a squeeze
signal.
0
4:3:
Select this option if the return video is a 4:3
aspect signal (including Letter Box).
[Setting Values:
R
16:9, 4:3]
Audio Set Item
Front Mic Select
For selecting the microphone to be connected to
the [MIC IN] terminal.
0
Stereo M/S:
Selects the stereo M/S (Mid/Side) direct output
microphone.
0
Stereo L/R:
Selects the stereo L/R type microphone.
0
Mono:
Selects the monophonic microphone.
[Setting Values: Stereo M/S,
R
Stereo L/R, Mono]
Memo :
0
When “Stereo M/S” is configured, use only
stereo M/S (Mid/Side) direct output
microphone.
Front Mic Power
Configure this setting when it is necessary to
48 V power to the microphone that is
connected to the [MIC IN] terminal.
[Setting Values:
R
On, Off]
Memo :
0
When using a microphone that does not require
a +48V power supply, make sure that it is set to
the “Off” position before connecting the
microphone.
Front Mic 1 Ref.
For setting the reference input level when the
[AUDIO INPUT CH1] or [AUDIO INPUT CH3]
selection switch is set to “FRONT”.
[Setting Values: -30dB, -40dB,
R
-50dB, -60dB]
Front Mic 2 Ref.
For setting the reference input level when the
[AUDIO INPUT CH2] or [AUDIO INPUT CH4]
selection switch is set to “FRONT”.
[Setting Values: -30dB, -40dB,
R
-50dB, -60dB]
Rear Mic 1 Ref.
For configuring the reference input level when the
[AUDIO INPUT CH1] or [AUDIO INPUT CH3]
selection switch is set to “REAR”, and the [AUDIO
INPUT1] selection switch to “MIC” or “MIC+48V”.
[Setting Values: -30dB, -40dB, -50dB,
R
-60dB]
Rear Mic 2 Ref.
For configuring the reference input level when the
[AUDIO INPUT CH2] or [AUDIO INPUT CH4]
selection switch is set to “REAR”, and the [AUDIO
INPUT2] selection switch to “MIC” or “MIC+48V”.
[Setting Values: -30dB, -40dB, -50dB,
R
-60dB]
Rear Line Ref.
For configuring the reference input level when one
of the [AUDIO INPUT CH1/CH2/CH3/CH4]
selection switches is set to “REAR”, and the
corresponding [AUDIO INPUT1/2] selection switch
is set to “LINE”.
[Setting Values:
R
+4dB, 0dB, -3dB]
A/V Set Menu
135
Menu
Display and
D
etailed
S
etti
ngs
Содержание Connected Cam GY-HC900CHE
Страница 2: ...2 ...