JVC Connected Cam GY-HC900CHE, Инструкция по эксплуатации

Страница: 71 / 236

Manual Adjustment Mode (Manual
Adjustment)
0
The manual adjustment mode is enabled by
setting the [AUDIO SELECT CH1/2/3/4]-
[MANUAL/AUTO] selection switch on this
camera recorder to “MANUAL”. The audio level
for each channel can be configured in [A/V
Set]
B
[Audio Set]
B
[CH1 Audio Level](/2/3/4)
B
[Front]/[Rear/Wireless].
0
You can adjust the level manually during the
recording, recording standby, and stop modes.
Memo :
0
The audio setting in Full Auto mode can be
configured in [Camera Function]
B
[Full Auto]
B
[Audio Set].
1
Set the [AUDIO SELECT CH1/2/3/4]-
[MANUAL/AUTO] selection switch to
“MANUAL” for the channel to be adjusted
manually.
2
Turn the adjustment knob corresponding
to the channel to adjust the level.
When [A/V Set]
B
[Audio Set]
B
[CH1/2 DRC]/
[CH3/4 DRC]
B
[Threshold Level] is set to “Off”,
adjust such that the audio level meter -2 dB
does not light up even for loud sounds.
(
A
P136 [ Threshold Level ] )
.
100min
50min
282min
1/ 60 F2. 8
AE
± 0
ND 1 /64
12 :34 : 56
ISO 102400
00: 00: 00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6f t
B 5600 K
-2dB
Memo :
0
The [Threshold Level], [Attack Time], [Decay
Time], [Mode], etc. of the compressor can be
configured in [A/V Set]
B
[Audio Set]
B
[CH1/2
DRC]/[CH3/4 DRC] for the audio to be recorded.
* DRC (Dynamic Range Compressor)
0
The limiter operates according to the setting in
[A/V Set]
B
[Audio Set]
B
[Limitter]
B
[CH1](/
2/3/4).
When [Limitter] is set to “Off”, the limiter function
is disabled even when the [MANUAL/AUTO]
switch is set to “AUTO”. This may cause the
OVER indication of the level meter to light up.
0
The reference audio level is configured in [A/V
Set]
B
[Audio Set]
B
[CH1/2 Audio Ref. Lv.]
(common for CH1/2)/[CH3/4 Audio Ref. Lv.]
(common for CH3/4).
Automatic Adjustment Mode
0
Set the [AUDIO SELECT CH1/2/3/4]-[MANUAL/
AUTO] selection switch to “AUTO” or press the
user button assigned with “Full Auto” to set Full
Auto mode to off. This activates the Automatic
Adjustment mode and the audio recording level
is configured automatically according to the
input level.
0
The audio setting in Full Auto mode can be
configured in [Camera Function]
B
[Full Auto]
B
[Audio Set].
Memo :
0
If [A/V Set]
B
[Audio Set]
B
[CH1/2 DRC]/
[CH3/4 DRC]
B
[Threshold Level] is set to a
value other than “Off”, the compressor operates
according to the value set.
Audio Recording
71
Sh
ooting