JVC Connected Cam GY-HC900CHE Скачать руководство пользователя страница 124

Страница: 124 / 236

TC/UB Menu

Menu screen for setting time code and user’s bit.

This item cannot be selected in the Media mode,

or during recording.

TC Mode

For configuring the TC mode settings.

SW Set:

Follows the settings of the [TC GEN] switch.

Clock:

This is set to “Clock” when the [TC GEN] switch

is set to “F-RUN”.

[Setting Values:

SW Set, Clock]

Memo :

When the [TC GEN] selection switch is set to “R-

RUN” or “REGEN”, or during “Interval

Rec”

, “Frame Rec”

and “High-

Speed”

, the setting is fixed at “SW Set”.

TC Preset

For setting the time code (hour, minute, second,

frame).

Display : Drop setting 02:02:25.20

: Non Drop setting 02:02:25:20

(

P74 [Setting Time Code Generator] )

Memo :

When the [TC GEN] switch is set to “REGEN”,

“<Regen>” is displayed and preset is disabled.

When [TC Mode] is set to “Clock”, “<Clock>” is

displayed and preset is disabled.

UB Mode

For setting the recording mode of the user’s bit.

Date:

Records the date.

Time:

Records the time.

Preset:

Records according to the preset setting.

(

P77 [Setting the User’s Bit] )

[Setting Values: Date, Time,

Preset]

Memo :

If [UB Mode] is set to “Time”, the user’s bit

operates in the 24-hour format even if the LCD

display is in the 12-hour format.

Preset

For setting the user’s bit. (Digit by digit)

Display : AB CD EF 01

(

P77 [Presetting the User’s Bit] )

Memo :

When [UB Mode] is set to “Date” or “Time”, this

item appears as “---” and preset is disabled.

When the [TC GEN] switch is set to “REGEN”,

“<Regen>” is displayed and preset is disabled.

Drop Frame

For setting the framing mode of the time code

generator.

Non Drop:

Internal time code generator works in the non-

drop-frame mode. Use this setting when placing

emphasis on the number of frames.

Drop:

Internal time code generator works in the drop-

frame mode. Use this setting when placing

emphasis on the recording time.

[Setting Values: Non Drop,

Drop]

Memo :

This item can be set only when [System]

[Record Set]

[Record Format]

[

Frame

Rate] is set to “60p”, “30p”, or “60i”. When

[Frame Rate] is “24p”

, “Non Drop”

becomes fixed and cannot be selected. When

[Frame Rate] is “50p”, “25p”, or “50i”, this item

appears as “---” and cannot be selected.

(

P152 [

Frame Rate ] )

124

TC/UB Menu

Menu

Display and

etailed

etti
ngs

Содержание Connected Cam GY-HC900CHE













































































































































































































































Результаты поиска

Содержание Connected Cam GY-HC900CHE

Отзывы:

Похожие инструкции для Connected Cam GY-HC900CHE

Бренды по названию

Популярные бренды

JVC Connected Cam GY-HC900CHE, Инструкция по эксплуатации

Результаты поиска

Содержание Connected Cam GY-HC900CHE

Отзывы:

Похожие инструкции для Connected Cam GY-HC900CHE

Бренды по названию

Популярные бренды