– 65 –
There are three timers available—Recording Timer, Daily
Timer, and Sleep Timer.
Before using these timers, you need to set the clock built
in the unit (see page 11).
Using Recording Timer
With Recording Timer, you can make an unattended
recording.
You can set Recording Timer whether the unit is turned on
or in the standby mode.
• You need to load an recordable MD before starting this
procedure.
• To correct a misentry any time during the setting process,
press CANCEL.
How Recording Timer actually works
The unit automatically turns on, muting the volume, and
starts recording on the MD when the timer-on time comes.
Then, when the timer-off time comes, the unit
automatically turns off (on standby).
Recording Timer works only once, but the timer settings
remain stored in memory until you reset them or unplug the
AC power cord.
On the remote control ONLY:
1
Press CLOCK/TIMER repeatedly until “REC
TIMER SET UP” appears in the main display.
The REC indicator starts flashing on the display.
The hour digit of the timer-on time starts flashing.
2
Set the timer-on time.
1) Press
¡
/
¢
or
4
/
1
repeatedly to adjust
the hour.
2) Press SET.
The minute digit starts flashing.
3) Press
¡
/
¢
or
4
/
1
repeatedly to adjust
the minute.
4) Press SET.
The hour digit of the timer-off time starts flashing.
3
Set the timer-off time by repeating the same
procedure described in step
2
.
4
Select the source to record from.
1) Press
¡
/
¢
or
4
/
1
repeatedly to select
the source.
The source changes as follows:
• If you have changed the source names, the
changed names will appear in the main display.
2) Press SET.
• When you select FM or AM (MW/LW) as the
source, select a preset number by pressing
¡
/
¢
or
4
/
1
, then press SET.
• When you select LINE or DIGITAL IN as the
source, prepare the external equipment with the
timer function.
5
Select the recording length mode.
1) Press
¡
/
¢
or
4
/
1
repeatedly to select
the recording length mode (SP/LP2/LP4).
The recording length mode changes as follows:
2) Press SET.
The REC indicator stops flashing and remains lit on
the display.
The contents of this setting appear in the main
display.
6
Press STANDBY/ON
to turn off the unit if
necessary.
To turn off the Recording Timer after its setting is done
1
Press CLOCK/TIMER once.
2
Press CANCEL.
“REC TIMER OFF” appears in the main display, and the
REC indicator goes off from the display.
To turn on the Recording Timer, press SET.
The REC indicator lights up on the display. The
settings you have stored are shown in the main display
for your confirmation.
• “NO SET SET REC!” appears in the main display
before you enter the timer settings.
Recording Timer will be canceled and the unit will
not turn off automatically by operating the unit
except when
• Adjusting the volume
• Pressing AHB PRO
• Adjusting the Bass and Treble sounds
FM?
AM?
DIGITAL
IN?
LINE?
SP REC?
LP2 REC?
LP4 REC?
EN64-67_CA-NXMD1R[B]f.pm6
01.8.20, 11:35
65
