– 43 –
About “
x
4 SPEED” speed recording
If you try to record with “
x
4 SPEED” using Program or Random
play mode, “CD PROGRAM CANNOT
x
4 RECORDING!” or
“CD RANDOM CANNOT
x
4 RECORDING!” appears in the
main display.
Recording FM/AM (MW/LW) Broadcasts
When you do not want to use Group recording function,
press GROUP on the remote control to turn off the
GROUP indicator on the display.
1
Insert a recordable MD into the MD loading slot
while the unit is turned on.
2
Tune into a station you want.
• For details, see pages 17 and 18.
• You cannot adjust the recording level.
3
Press REC TIME on the remote control to select the
recording length mode.
• Each time you press the button, the recording length
mode changes as follows:
The indicator corresponding to the selected recording
length mode lights up on the display.
• For the recording length mode, see “Stereo Long-
Hour Recording (MDLP)” on page 39.
4
Press REC START on the unit.
The RECORDING indicator lights up and “REC
START” appears in the main display, then the recording
starts.
To stop recording, press
7
.
“WRITING” flashes for a while.
SP REC
LP2 REC
LP4 REC
To change the information shown in the main display
while recording
On the remote control ONLY:
Each time you press DISP./CHARA, the information in the
main display changes as follows:
*
When Group recording is activated.
** “0:00” flashes in the main display, before you set the
built-in clock (see page 11).
To put a track mark manually while recording
On the remote control ONLY:
Press SET at the place you want to put a track mark.
“TRK MARKING” appears in the main display for a while.
• For details, see “About the track marks” on page 38.
Recording the External Equipment—Sound
Synchronized Recording
With this recording method, you can start recording
automatically when the source sound comes into this unit
through the LINE IN jacks or the OPTICAL DIGITAL IN
terminal.
Sound Synchronized Recording will stop automatically if
no sound comes in for more than 30 seconds.
• If you want to adjust the recording level, see page 41.
When the digital signal comes in through the
OPTICAL DIGITAL IN terminal, the unit does digital-
to-digital recording.
• You cannot record the sound coming into this unit
through the USB AUDIO terminal.
When you do not want to use Group recording function,
press GROUP on the remote control to turn off the
GROUP indicator on the display.
B A S S
RECORDING
GROUP
SP LP
2
LP
4
RECORDING indicator
GROUP indicator
Recording length
mode indicator
Band and frequency
MD track number and
group number
*
Remaining recording
time of MD
Recording
length mode
Clock time
**
EN37-44_CA-NXMD1R[B]f.pm6
01.8.20, 11:34
43
