– 25 –
Basic CD Operations
While playing a CD, you can do the following operations.
To stop playback for a moment
Press CD
3
/
8
.
To resume play, press CD
3
/
8
again.
To go to another track
Press
¡
/
¢
or
4
/
1
(
¢
or
4
on the unit)
repeatedly.
•
¡
/
¢
(
¢
) : Skips to the beginning of the next or
succeeding tracks.
•
4
/
1
(
4
) : Goes back to the beginning of the
current or previous tracks.
When CD player is stopped, you can skip or go back to the
tracks continuously by pressing and holding the button.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you to start playing
the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
To locate a particular point in a track during play
Press and hold
¡
/
¢
or
4
/
1
(
¢
or
4
on the
unit).
•
¡
/
¢
(
¢
) : Fast-forwards the tracks.
•
4
/
1
(
4
) : Fast-reverses the tracks.
To change the information shown in the main display
On the remote control ONLY:
Each time you press DISP./CHARA, the information in the
main display alternates between the source indication and
the clock indication.
About CD indicator
Source is
“CD”
A CD is
loaded
During
playback
During
pause
CD
CD
CD
CD
Programing the Playing Order of the Tracks
—Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
On the remote control ONLY:
1
Load a CD.
2
Press CD
3
/
8
, then
7
.
The source is changed to “CD.”
3
Press PLAY MODE repeatedly until “ CD
PROGRAM” appears in the main display.
The PROGRAM indicator also lights up on the display.
• Each time you press the button, play mode changes
as follows:
• If a program has been stored in memory, the program
is called up.
4
Press the number buttons to select the tracks.
• For how to use the number buttons, see “To go to
another track directly using the number buttons” to
the left.
5
Repeat step
4
to
program other tracks you want.
6
Press CD
3
/
8
.
The tracks are played in the order you have programed.
Program play ends when all the programed tracks are
played (unless Repeat play is activated).
To stop during play, press
7
.
To exit from Program play mode, press PLAY MODE
once or twice so that the unit enters another playback mode
(Random play or Normal play mode) before or after play.
CD PROGRAM
(Program play)
CD RANDOM
(Random play)
CD NORMAL
(Normal play)
Step No.
Ex. Track No. 5 is selected
Total playing time
The current track
EN23-26_CA-NXMD1R[B]f.pm6
01.8.20, 11:34
25
