JVC CA-NXMD1R страница 16 Скачать руководство пользователя

Страница: 16 / 80

– 11 –

Before operating the unit any further, first set the clock
built in this unit, then some other basic settings.

Turning On the Power

When you press the play button (

) for a particular

source or the source selecting buttons such as FM/AM and
USB/LINE, the unit automatically turns on (and starts
playback if the source is ready).

To turn on the unit without playing, press
STANDBY/ON

so that the STANDBY/ON lamp on

the unit lights green.

• The

indicator starts flashing if the built-in clock is

not set.

To turn off the unit (on standby), press
STANDBY/ON

again so that the STANDBY/ON lamp

lights red.

A little power is always consumed even while the unit is in
standby mode.

To switch off the power supply completely, unplug the
AC power cord from the AC outlet.

When you unplug the AC power cord or if a power
failure occurs

The clock is reset to “0:00” after about a minute, while the tuner
preset stations and other settings will be erased in a few days.

Setting the Clock

You can set the clock whether the unit is turned on or in
standby mode.

On the remote control ONLY:

Press CLOCK/TIMER.
The hour digit in the main display starts flashing.

Press

repeatedly to adjust the

hour.
• When you press and hold the button, the hour digit

changes continuously.

Press SET to set the hour.

The minute digits start flashing.

• If you want to correct the hour after pressing SET,

press CANCEL. The hour digit starts flashing again.

Press

repeatedly to adjust the

minute.
• When you press and hold the button, the minute digit

changes continuously.

Press SET to finish setting the clock.
“ADJUST OK” appears in the main display, and the
built-in clock starts.
The

indicator stops flashing and remains lit.

To adjust the clock again

Once you have adjusted the clock, you need to press
CLOCK/TIMER repeatedly until the clock setting screen
appears in the main display (the hour digit starts flashing).

To turn on the clock indication

You can turn on the clock indication on the display while
the unit is in standby mode.

On the remote control ONLY:
Press DIMMER (CONTRAST) while the unit is in standby
mode.
The clock indication appears on the display.

To turn off the clock indication for saving the power
again, press DIMMER (CONTRAST) while the unit is in
standby mode.

EN10-15_CA-NXMD1R[B]f.pm6

01.8.20, 11:34

Содержание CA-NXMD1R

















































































Результаты поиска

Содержание CA-NXMD1R

Отзывы:

Похожие инструкции для CA-NXMD1R

Бренды по названию

Популярные бренды

JVC CA-NXMD1R, Инструкция по эксплуатации

Результаты поиска

Содержание CA-NXMD1R

Отзывы:

Похожие инструкции для CA-NXMD1R

Бренды по названию

Популярные бренды