– 63 –
About the number of characters inputted for an MD
The total number of characters that can be input for an MD is
1 792. The maximum number that can be input for each title is 61.
(However, the actual number you can input may be slightly less
than this maximum number due to the MD limitations—see page
70.)
• A space can be counted as one character.
• When the stereo long-hour recording (LP2 or LP4: see page 39)
method is used for recording, the maximum number you can
input for a track title is automatically reduced since “
LP:
” and
four spaces are automatically added to the beginning of the track
title. Consequently this reduces the total number of characters
you can input for an MD.
Example: You can input up to 10 characters for each track if an
MD is composed of 120 tracks recorded using the stereo long-hour
recording method.
Changing Titles
You can make a correction or change the title.
1
Insert an MD you want to edit into the MD loading
slot while the unit is on.
2
Enter into the title entry mode.
• For the disc title or the track title:
Press MD TITLE/EDIT.
• For the group title:
Press MD TITLE/EDIT twice while the GROUP
indicator is lit on the display.
Group title entry screen appears in the main display.
• If you want to select the title entry screen again, press
ENTER, then repeat this step.
3
Select the desired title entry screen.
• For the disc title:
Press
4
/
1
repeatedly until “DISC TITLE?”
appears in the main display.
• For the track title:
Press
¡
/
¢
or
4
/
1
repeatedly until the
desired track number and “TITLE?” appear in the
main display.
• For the group title:
Press GROUP
or
repeatedly until the
desired group number (“GR” and the number) and
“TITLE?” appear in the main display.
4
Press SET.
The MD recorder enters one of the following title entry
screens.
5
Press
or
to select the character you want
to correct.
• Make sure that the character you want to change is
flashing.
6
Press CANCEL to delete the character you have
selected in the above step.
7
Input the correct character, referring to step
5
on
pages 61 and 62.
8
Repeat steps
5
to
7
of the current procedure to
correct more characters.
9
Press ENTER to finish correcting the title.
• If you want to correct another title, repeat from step
3
of the current procedure.
• If you want to finish the correction, go to the next
step.
10
Press ENTER again to exit from the title entry
mode.
11
Press
0
MD on the unit to eject the MD.
“WRITING” flashes while the editing you have made
is being recorded on the MD.
To erase all the characters
Press CANCEL repeatedly in step
6
left to erase all the
characters, then go to steps
9
to
11
.
EN60-63_CA-NXMD1R[B]f.pm6
01.8.20, 11:35
63
