– 15 –
AHB 1
AHB 2
AHB OFF
(canceled)
Adjusting the Bass and Treble Sounds
You can adjust bass and treble sound effects to your taste
and surroundings.
• You can use this effect only for playback.
• This function also effects the sound from headphones.
On the remote control ONLY:
1
Press TONE CONTROL to select “BASS” or
“TREBLE.”
The selected tone control mode and the current setting
appear in the main display.
• Each time you press the button, the tone control
mode changes as follows:
2
Press or – to adjust the selected tone
level.
• You can adjust the tone level within the range of –5
to +5.
3
Repeat steps
1
and
2
to adjust the other tone level.
4
Press TONE CONTROL to finish the setting.
• If you do not press the button about 5 seconds, the
setting will be also stored, then the source indication
will be resumed.
BASS
TREBLE
Source indication
(canceled)
Ex.“BASS” is selected
Ex.“BASS” level is set to “+3”
B A S S
RECORDING
BASS indicator
For private listening
Connect a pair of headphones to the PHONES jack inside the front
door. No sound comes out of the speakers. Be sure to turn down
the volume before connecting or putting on the headphones.
If “CANNOT LISTEN!” appears in the main
display
During high-speed recording (see page 40), you cannot listen to
any source, and therefore, cannot adjust the volume level.
DO NOT turn off (on standby) the unit with the
volume set to an extremely high level; otherwise, the
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source.
REMEMBER you cannot adjust the volume level
while the unit is in standby mode.
Reinforcing the Bass Sound
The richness and fullness of the bass sound is clearly
maintained regardless of how low you set the volume
—Active Hyper Bass Pro.
• You can use this effect only for playback.
• This function also effects the sound from headphones.
On the remote control ONLY:
To get the effect, press AHB PRO repeatedly until “AHB
1” or “AHB 2” appears in the main display.
The BASS indicator lights up on the display.
• Each time you press the button, the Active Hyper Bass
Pro mode changes as follows:
• “AHB 2” is more effective than “AHB 1.”
To cancel the effect, press AHB PRO repeatedly until
“AHB OFF” appears in the main display.
The BASS indicator goes off from the display.
EN10-15_CA-NXMD1R[B]f.pm6
01.8.20, 11:34
15