– 32 –
(Blank)
4
Input character(s) to search for the track title.
You can input up to 5 characters. The unit will search
for the tracks which have the input characters at the
head of their titles.
• You can also search for the tracks without a title. In
this case, go to step
5
.
1) Press DISP./CHARA to select the character set
you want.
Each time you press the button, the character sets
change as follows:
2) Press the character entry button for a character
you want to input.
Examples:
• To input an “A” or “a,” press ABC once.
To input a “B” or “b,” press ABC twice.
To input a “C” or “c,” press ABC three times.
• To input a symbol, press MARK repeatedly until
the mark you want appears.
• To input a numeral, press 0 – 9.
• To enter a space while entering a title, press
twice.
• To move the character entry position while
entering a title, press
or
.
• If you have entered an incorrect character, press
CANCEL to cancel the last entry.
3) Repeat steps
4
– 1) and
4
– 2) to input other
characters.
• If the character you want to input next is assigned
to the same button you have just pressed in step
4
– 2), press
first to move the character entry
position to the right.
5
Press ENTER.
“SEARCH” flashes in the main display. The unit starts
searching for the track.
• When the track with the desired title is found, the unit
plays back the track. (After the track is played, the
unit starts searching for the next track.)
• If no track with the desired title is found, “SEARCH
END” appears in the main display and Normal play
mode resumes.
To skip the current playback and search for the next
track, press
¡
/
¢
.
To cancel title searching, press TITLE SEARCH.
When you press the button during playback, Normal play
resumes.
Available Symbols are as follows:
Prohibiting Disc Ejection—Disc Lock
You can prohibit CD and MD ejection from the unit and
can lock discs.
On the unit ONLY:
To prohibit disc ejection
1
Press and hold
7
when the unit is in standby mode.
2
Press
0
CD.
“LOCKED” appears for a while, and the loaded discs
(both CD and MD) are locked.
3
Release your finger from
7
.
If you try to eject the locked discs
“LOCKED” appears to inform you that the Disc Lock is in use.
To cancel the prohibition and unlock the discs, repeat the
above procedure.
“UNLOCKED” appears for a while in step
2
, and the
loaded discs (both CD and MD) are unlocked.
Capital letters
& Symbols
Small letters
& Symbols
Numerals
EN27-32_CA-NXMD1R[B]f.pm6
01.8.20, 11:34
32
