manualshive.com logo in svg

JVC CA-NXMD1R, Инструкция по эксплуатации, Страница: 14 / 80

Поделиться
Скачать
JVC CA-NXMD1R Скачать руководство пользователя страница 14

– 9 –

NOW, you can plug in the unit and other connected
equipment FINALLY!

Putting the Batteries into the Remote
Control

Insert the batteries—R6P(SUM-3)/AA(15F)—into the
remote control, by matching the polarity (+ and –) on the
batteries with the + and – markings on the battery
compartment.
When the remote control can no longer operate the unit,
replace both batteries at the same time.

1

3

• DO NOT use an old battery together with a new

one.

• DO NOT use different types of batteries together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery

compartment when you are not going to use the
remote control for an extended period of time.
Otherwise, it will be damaged from battery leakage.

R6P(SUM-3)/AA(15F)

2

1 

To the AC IN terminal

2

  To a wall outlet

AC power cord (supplied)

IMPORTANT: Be sure to check all connections to be
done before plugging the AC power cord into a wall
outlet.

EN01-09_CA-NXMD1R[B]f.pm6

01.8.20, 11:34

9

Содержание CA-NXMD1R

















































































Отзывы:

Нет отзывов