Jura IMPRESSA J7, Руководство пользователя

Страница: 40 / 64

40
5 Permanent settings in programming mode
Continue turning the Rotary Switch to switch to the per-
formed descaling and filter change operations.
k T
Press the Rotary Switch to enter the programme item.
The number of performed cleaning operations appears on
the display.
By turning the Rotary Switch, the maintenance status can also
be displayed in addition to the number of performed mainte-
nance programmes. The filled out fields show the mainte-
nance status. Once all fields are filled out, your IMPRESSA will
request the respective maintenance programme.
k T
Press the Rotary Switch to exit the programme item.
CLEAN
g T
Turn the Rotary Switch until
EXIT
is displayed.
k T
Press the Rotary Switch to exit the programme item.
INFO
g T
Turn the Rotary Switch until
EXIT
is displayed.
k T
Press the Rotary Switch to exit programming mode.
READY
You can change the unit for the amount of water from ‘ml’ to ‘oz’.
Example : Proceed as follows to change the unit for the amount of
water from
ML
to
OZ
.
k T
Keep the Rotary Switch pressed until
RINSE
appears.
g T
Turn the Rotary Switch until
DISPLAY
is displayed.
k T
Press the Rotary Switch to enter the programme item.
ML
g T
Turn the Rotary Switch until
OZ
is displayed.
k T
Press the Rotary Switch to confirm the setting.
OK
appears briefly on the display.
DISPLAY
g T
Turn the Rotary Switch until
EXIT
is displayed.
k T
Press the Rotary Switch to exit programming mode.
READY
E
E
Unit, amount of water Unit, amount of water