Jura IMPRESSA J7, Руководство пользователя

Страница: 19 / 64

19
2 Preparing and using for the first time
Fill the water tank with fresh, cold water and reinsert the
tank.
Place a receptacle (at least 500 ml) under the frother.
If you are using the Professional Cappuccino Frother , set the
selector switch of the frother to the steam position
n
.
c T
Press the maintenance button.
FILTER RINSING
. Water flows out of the frother.
You can interrupt rinsing of the filter at any time by pressing
the maintenance button
c
.
The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml.
HEATING
appears on the display, then
READY
is
displayed. The filter is now activated.
If you are using the CLARIS Blue filter cartridge and have acti-
vated it in programming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the IMPRESSA needs to
be descaled. It is therefore important to adjust the water hardness.
The water hardness can be adjusted on a continuous scale between
1° dH and 30° dH. This can also be deactivated, which means that
the IMPRESSA will not let you know when it has to be descaled.
You can find out what the water hardness is by using the Aquadur®
test strip supplied as standard.
Hold the test strip briefly (for one second) under flowing
water. Shake off the water.
Wait for about one minute.
You will then be able to read the degree of water hardness
from the discolouration of the Aquadur®test strip and the
description on the packaging.
You can now adjust the water hardness.
T
T
E
E
E
E
T
T
T
Determining and
adjusting the
water hardness Determining and
adjusting the
water hardness
Determining the water
hardness
Determining the water
hardness