Jura IMPRESSA J7, Руководство пользователя

Страница: 26 / 64

26
3 Familiarising yourself with the control options
It is easy to make permanent settings for the amount of water for all
speciality coffees as well as hot water and steam according to the
cup size. As in the following example, adjust the amount of water
once. Every time you prepare a drink in the future, this amount of
water will be dispensed.
The permanent settings for adapting the amount of water to the cup
size for all speciality coffees, hot water and steam follow this
model.
Example : Proceed as follows to make permanent settings for the
amount of water for a coffee.
Precondition :
READY
is displayed.
Place a cup under the coffee spout.
o T
Touch the Coffee symbol.
1 COFFEE
is displayed for about two seconds. The Coffee
symbol is active.
READY
. T
Touch the Start symbol for about three seconds , until
ENOUGH COFFEE ?
appears on the display.
Preparation starts and the coffee flows into the cup.
. T
Touch the Start symbol as soon as there is sufficient coffee
in the cup.
Preparation stops.
OK
appears briefly on the display. The set
amount of water for one coffee will be permanently stored.
READY
appears on the display.
You can alter these settings at any time by repeating the
above procedure.
You can also make permanent settings for the amount of
water for all speciality coffees in programming mode, in the
BUTTONS
programme item.
You can make permanent settings in programming mode. For
example, you can change product settings such as aroma and the
amount of water or activate an energy saving mode.
Simply by turning and pressing the Rotary Switch you can navigate
through the easy-to-understand programme items and make per-
manent settings.
T
E
E
Setting the water for
the cup size Setting the water for
the cup size
Permanent settings in
programming mode Permanent settings in
programming mode