Juniper XRE200 -, Руководство по оборудованию

Страница: 99 / 188

CAUTION: You must power off the external Routing Engine if you need to remove
or insert a VCCI module.
See these topics for instructions for installing and removing components:
•
Installing an AC or DC Power Supply in an XRE200 External Routing Engine on page 96
•
Removing an AC or DC Power Supply from an XRE200 External Routing Engine on page 95
•
Installing a Fan Module in an XRE200 External Routing Engine on page 93
•
Removing a Fan Module from an XRE200 External Routing Engine on page 92
•
Installing an HDD Module in an XRE200 External Routing Engine on page 103
•
Removing an HDD Module from an XRE200 External Routing Engine on page 102
•
Installing a VCCI Module in an XRE200 External Routing Engine on page 101
•
Removing a VCCI Module from an XRE200 External Routing Engine on page 99
SEE ALSO
XRE200 Cooling System | 33
AC Power Supply in an XRE200 External Routing Engine | 35
Virtual Chassis Control Interface (VCCI) Modules in an XRE200 External Routing Engine | 42
Hard Disk Drive (HDD) Module in an XRE200 External Routing Engine | 43
Removing a VCCI Module from an XRE200 External Routing Engine
XRE200 External Routing Engines have two Virtual Chassis Control Interface (VCCI) module slots on the
front panel. The slots support 10/100/1000BASE-T RJ-45 and 1000BASE-X Gigabit Ethernet small
form-factor pluggable (SFP) VCCI modules. The VCCI modules are offline field-replaceable units (FRUs).
You can use this procedure for both types of VCCI modules.
Ensure that you have the following parts and tools available to remove a VCCI module:
•
Phillips (+) screwdriver, number 2
•
An antistatic bag or an antistatic mat
99