Juniper ULTRA-RUGGED FIELD PC, Справочное руководство, Страница: 96 / 170

Taking the Field PC out of extended storage.
The
battery pack discharges slightly during extended storage
periods. When you are ready to use your Field PC again,
follow these steps so your battery pack runs efficiently:
1. Plug the Field PC into a charger.
2. Charge the battery pack. (To check the battery
power status, tap on the battery icon at the top
of the screen.
) Only charge the battery pack in
temperatures between 32°F and 104°F (0°C and
40°C). For best results, charge the battery pack at
room temperature (68°F or 20°C).
Protecting the touchscreen
Protect the touchscreen from impact, pressure, or
abrasive substances that could damage it. To further
protect the touchscreen, apply one of the screen
protectors that came with your Field PC.
CAUTION: Be sure to replace the screen protector as
often as the screen protector packaging directs.
To apply a screen protector, follow these steps:
1. Make sure the Field PC screen is
free of oils and
dirt. You can wipe it with
a microfiber cloth.
2. Align bottom corners of
the screen protector with
the Field PC screen.
3. Smooth the screen protector while peeling back the
liner, working out air bubbles as you go. Continue
smoothing until the paper liner is removed.
Note: Some air bubbles may still be visible, but they
fade away in a short time. You can use a credit card to
gently push out any excess air.
!!
88