Juniper ULTRA-RUGGED FIELD PC, Справочное руководство, Страница: 35 / 170

Chapter 3: Using the Hardware
27
2. Tap and hold the file you
want to copy to your Field
PC. A pop-up menu
appears, as shown here.
Note : If you want to copy
multiple files, tap and drag
the stylus over the files.
Once the files are selected,
tap and hold the stylus on
the files until a pop-up
menu appears.
3. Select Copy .
4. Open the destination folder
where you want to place
your copied file.
5. Tap and hold the stylus on
the white space below the
existing files until the pop-
up menu appears again.
6. Select
Paste
. The file is
copied and its name
appears on the screen.
Reattaching the standard cap.
To reattach the standard cap,
follow these steps:
1. Make sure the hand strap is attached to its top latch.
2. Place the standard cap over the case.
3. Use a screwdriver to turn the standard cap screws
until they are firmly in place.
CAUTION: Do not overtighten the screws. Tightening
the screws over 12-in-lb (1.36 N-m) could result in a
failure. The torque specs for the standard cap are
2-in-lb (0.23 N-m).
!!