Juniper ULTRA-RUGGED FIELD PC, Справочное руководство, Страница: 31 / 170

Chapter 3: Using the Hardware
23
4. Press on the battery door about 1/4”
beneath the door latch and slide the
door latch to the right.
5. Remove the battery door. Note:
The door may make a noise
while it is being removed,
caused by the door scraping
against the battery.
The sound
is normal; no damage is done
when you hear this sound.
6. Remove the old battery pack.
7. Make sure the battery contacts
of the charged battery pack
are clean and dry.
8. Insert the charged battery
pack, lining up the battery
contacts with the Field PC
contacts.
9. Insert the tabs on the bottom
of the battery door into the
case slots.
10. Close the battery door, making
sure the door latch is in the
unlock position as the door
meets the case.