ip_tables: (C) 2000–2002 Netfileter core team
Done!
Your NSMXpress is now active on the network.
To configure your system via a web browser, connect to:
https://10.150.43.205/admin
To configure your system via command line, type:
nsm_setup
For operation of NSM server, switch to user “nsm”.
Please consult NSM product documentation for details.
[admin@NSMXpress ~]$
To configure the NSM software using the CLI, see the
NSMXpress User Guide
. To configure
the NSM software using the Web interface, go to “Web Interface Configuration” on
page 8.
Web Interface Configuration
To configure NSM on your system from a Web interface, use the following steps.
1.
Copy the URL (starting with
https://
) from the terminal emulator after installing
NSMXpress:
Your NSMXpress is now active on the network.
To configure your system via a web browser, connect to:
https//10.150.43.205/administration
2.
Open a Web browser and paste the URL into the address text box.
3.
Press Enter to open the NSMXpress login page.
4.
Enter the admin user name and password and then click Login.
5.
See “Configuring the NSM Software” on page 8 for details about how to install and
configure NSM on your NSMXpress appliance from the Web interface.
Configuring the NSM Software
After logging in as an ‘admin’ user, an initial setup script walks you through additional
configuration system settings before finalizing the NSM installation. This chapter describes
that setup process.
Your NSMXpress appliance comes preconfigured as a regional server or a central manager.
Most installation and configuration steps in this section are identical for both types of
server. All exceptions are noted.
Copyright © 2010, Juniper Networks, Inc.
8
NSMXpress Quick Start
