1.
On the NSM Configuration Main Menu, click
Menu
next to High Availability to access
HA options. See Figure 4 on page 12.
Figure 4: High Availability Options
2.
Use the High Availability option to turn HA on (
y
) or off (
n
). The default is off.
3.
Use the
Primary Status
option to set your NSMXpress appliance as either the primary
or secondary server in the HA cluster. If you select
y
, it is the primary server (the default).
If you select
n
, it is the secondary server.
4.
Use the
HA Remote IP
option to enter the IP address for the HA peer in the HA cluster.
5.
Use the
HA Link Failure Detection
IP option to enter the IP address of a computer
outside the HA cluster that you can ping to verify connection status.
6.
Use the
HA Inter-server password
option to enter the heartbeat password used between
the primary and secondary servers.
7.
Click
Submit
to save the changes.
8.
Click
Menu
next to Shared Disk (see Figure 4 on page 12) to configure a shared disk
for regional servers (see Figure 5 on page 13) or for central managers (see Figure 6
on page 13). This step is optional.
Copyright © 2010, Juniper Networks, Inc.
12
NSMXpress Quick Start
