•
Description—A brief description of the appliance.
4.
Click
Save
.
SNMP Trap Configuration
To configure SNMP trap conditions:
1.
Select
System Administration > SNMP Monitoring
.
2.
Select the
SNMP Traps
tab, which is shown in Figure 34 on page 30.
Figure 34: Configuring SNMP Traps
3.
In the
Manager IP
field, enter the IP address of the SNMP management server.
4.
Select from the following trap conditions:
•
Disk space low
Enter the percentage of free disk space below which SNMP issues a trap.
•
Memory low
Enter the percentage of free memory below which SNMP issues a trap.
•
CPU high
Enter the percentage of CPU use over which SNMP issues a trap.
•
NSM start/stop
•
Admin Logon/Logoff
•
External IP unreachable
Enter the IP address of the required device.
5.
Click
Save
.
Copyright © 2010, Juniper Networks, Inc.
30
NSMXpress Quick Start
