Product Specifications
9/30
4156 EN
M
M
M
M
Attention
Connecting an incorrect battery to the charger can result in damage to the charger
and battery: The battery could gas, decoct or even explode.
Always check that the charger is set for your battery type. If in doubt, contact the
relevant experts.
M
M
M
M
Attention
Corrosive acid gases can be produced when a battery is being charged. Acid gases
can cause short circuits in electrical equipment (risk of burning) and can corrode
components.
Therefore always position batteries next to charging stations in such a way that any
acid gases arising can be freely distributed (reduced) on site and can dissipate.
3.5
Protective Mechanisms
The charger has been designed and constructed in accordance with state-of-the-art
technology. If used properly, it therefore poses no danger to the health and safety of
those operating it or third parties.
All live assemblies are fitted with housings and panels that can only be undone with
tools. All cables and connectors are appropriately screened / earthed. The charger has an
IP 21 protection class.
All electric and electronic components bear the CE mark; all necessary isolating
distances have been observed. All circuits are fitted with primary and secondary fuses
with defined current rating and activation characteristics.
All metallic components are earthed via an earth lead system.
The charger is fitted with an automatic cutout function as soon as the preset maximum
charge status of the battery is reached. This avoids overloading and excessive release of
explosive gases.
