Jungheinrich DFG 660, Руководство по эксплуатации

Страница: 215 / 221

11
.1
4
E
N
216
10 Clean the engine oil cooler.
t
11 Check and clean radiator.
t
12 Check transmission for noise and leakage.
t
13 Replace transmission oil.
t
14 Check tyre air pressure and top up if necessary.
t
15 Check wheels for wear and damage.
t
16 Check wheel suspension and attachment.
t
17 Test starter and generator, Check wires and attachment.
t
18 Replace engine oil filter.
t
19 Note: replace multi-V belt every 3000 service hours.
20
Check V belt / multi-V belt is tensioned and check for damage.
Replace if necessary.
t
21 Replace air filter.
t
22 Check air filter, replace if necessary.
t
23 Check engine for noise and leakage.
t
24 Replace engine oil.
t
25 Check engine suspension.
t
26 Test water pump and the fans.
t
27 Replace the spark plugs.
t
28 Check drive axle for noise and leakage.
t
29 Replace drive axle oil.
t
30 Clean or replace transmission oil suction filter if necessary.
t
Chassis and Superstructure W A B C
1 Check chassis and screw connections for damage.
t
2 Check doors and/or covers.
t
3 Check labels are legible and complete.
t
4 Check attachment and setting function of the driver's seat.
t
5 Check condition of the driver’s seat.
t
6
Check engine compartment for contamination and clean if
necessary.
t
7 Check attachment of the counterweight.
t
8 Check mast attachment / mounting.
t
9 Check trailer coupling or tow mechanism stop.
t
10
Check overhead guard and / or cab are secure and check for
damage.
t
11 Check operator mat and steps are non-slip and damage-free.
t
12 Test driver's seat restraint system and check for damage.
t
Travel W A B C