Jungheinrich DFG 660, Руководство по эксплуатации

Страница: 122 / 221

123
11
.1
4
E
N
Safety instructions for attachments when transporting suspended loads
WARNING!
Swinging loads and a reduced residual capacity can result in accidents.
Transporting hanging loads can reduce the stability of the truck.
X Adapt the travel speed to the load, less than walking pace.
X Secure swinging loads for example with lifting slings.
X
Reduce the residual capacity and have it certified by a expert.
X If the truck is to be operated with hanging loads, proof of sufficient safety distance
under local operating conditions must be obtained from a specialist assessor.
Safety instructions for using loading buckets as attachments
WARNING!
Increased mast loading can cause accidents.
X
When carrying out the daily checks and operations before starting, see "Checks
and operations to be performed before starting daily operation" on page 86, check
in particular check the fork carriage, mast rails and mast rollers for damage.
Fork extension safety instructions
WARNING!
Unsecured and oversized fork extensions can cause accidents.
X For fork extensions with an open cross sectional area, carry only loads that are
resting along the entire length of the fork extension.
X Use only fork extensions with the same fork cross section and minimum fork length
of the truck and which comply with the details on the fork extension data plate.
X The basic fork length must be at least 60% of the length of the fork extension.
X Lock the fork extensions onto the basic forks.
X
When carrying out the daily checks and operations before starting, see "Checks
and operations to be performed before starting daily operation" on page 86, check
also the fork extension lock.
X Mark any fork extensions with an incomplete or faulty lock and take them out of
service.
X Do not use trucks with an incomplete or faulty fork extension lock. Replace the fork
extension.
X Only restore the fork extension to service when the fault has been rectified.
X Use only fork extensions which are free of dirt and foreign bodies near the entry
opening point. Clean the fork extensions as required.