Jungheinrich DFG 660 Скачать руководство пользователя

Страница: 101 / 221

102

6.3

Operational Checks

WARNING!

After starting the engine, perform the following operational checks:

Procedure

• Check whether the parking brake is locked

in place.

• Turn the steering wheel as far as it will go

in both directions and test the steering.

• Test the lift/lower, tilt and if applicable the

attachment hydraulic control functions.

• Test the horn.
• Test the engine speed with the accelerator

pedal (75) over a range of speeds while
checking the freedom of movement of the pedal.

• Release the parking brake. Start driving carefully and press the parking brake (76)

to test it.

•

• Press the "F5" button to lock the parking brake.

When all operational checks have been performed without problems, the truck is
ready for operation.

Содержание DFG 660






























































































































































































































Результаты поиска

Содержание DFG 660

Отзывы:

Похожие инструкции для DFG 660

Бренды по названию

Популярные бренды

Jungheinrich DFG 660, Руководство по эксплуатации

Результаты поиска

Содержание DFG 660

Отзывы:

Похожие инструкции для DFG 660

Бренды по названию

Популярные бренды