manualshive.com logo in svg

Jungheinrich DFG 660, Руководство по эксплуатации, Страница: 155 / 221

Поделиться
Скачать
Jungheinrich DFG 660 Скачать руководство пользователя страница 155

11

.1

4

 E

N

156

3

Lubricants and Lubrication Schedule

3.1

Handling consumables safely

Handling consumables

Consumables must always be handled correctly. Follow the manufacturer’s
instructions.

WARNING!

Improper handling is hazardous to health, life and the environment

Consumables can be flammable.

X

Keep consumables away from hot components and naked flames.

X

Always keep consumables in prescribed containers.

X

Always fill consumables in clean containers.

X

Do not mix up different grades of consumable. The only exception to this is when
mixing is expressly stipulated in the operating instructions.

CAUTION!

Spilled consumables can cause slipping and endanger the environment

Risk of slipping from spilled consumables. The risk is greater when combined with
water.

X

Do not spill consumables.

X

Spilled consumables must be removed immediately with an appropriate bonding
agent.

X

The bonding agent / consumable mixture must be disposed of in accordance with
regulations.

Содержание DFG 660






























































































































































































































Отзывы:

Нет отзывов