Jungheinrich DFG 540, Руководство по эксплуатации

Страница: 102 / 171

0 0
8 8
102 102
..
1 1
2 2
E E
N N
6. 6.12 12 Sp Spee eed r d red educ ucti tion on
The maximal achievable speed is limited to a preset value. Full motor speed and The maximal achievable speed is limited to a preset value. Full motor speed and
power are available while stopped and accelerating. The speed of the motor is not
power are available while stopped and accelerating. The speed of the motor is not
ramped down until the set maximum speed is reached.
ramped down until the set maximum speed is reached.
The maximum speed is factory set and can be adjusted by trained and authorised The maximum speed is factory set and can be adjusted by trained and authorised
customer service personnel.
customer service personnel.
6. 6.13 13 Tr Tran ansm smis issi sion on blo block ck
The gear block is an option which prevents the driver from starting the truck if it is in The gear block is an option which prevents the driver from starting the truck if it is in
gear. The block also prevents the driver from changing the direction of travel when
gear. The block also prevents the driver from changing the direction of travel when
the truck is in second gear.
the truck is in second gear.
Z Z
Important: although the truck can travel when shifting gear in idle, braking is still Important: although the truck can travel when shifting gear in idle, braking is still
enabled.
enabled.
6. 6.14 14 Re Reve vers rsin ing B g Blo lock ck
The travel direction can only be changed (reversing) if the industrial truck is travelling The travel direction can only be changed (reversing) if the industrial truck is travelling
at less than 3 km/h. If the driver attempts to change direction without braking at a
at less than 3 km/h. If the driver attempts to change direction without braking at a
faster speed, the system automatically activates
faster speed, the system automatically activates idle speed. The required travel level idle speed. The required travel level
can only be applied when the sp can only be applied when the speed is reduced accordingly. eed is reduced accordingly.
The drive cannot be set from neutral to travel if the engine is more than 300 rpm The drive cannot be set from neutral to travel if the engine is more than 300 rpm
above idle speed. Travel is only activated
above idle speed. Travel is only activated when the speed falls below this when the speed falls below this limit. limit.
6.15 6.15 Direc Direction tion switc switch m h mounted ounted to t to the he stee steering ring colum column n
The travel direction switch is attached to the The travel direction switch is attached to the
steering column on the left
steering column on the left
When the travel direction switch is in the When the travel direction switch is in the
centre position, the drive is in idle / neutral
centre position, the drive is in idle / neutral
Procedure Procedure
•• To se To selec lect forw t forward ge ard gear, pu ar, push the l sh the leve ever r
forward. forward.
•• To se To selec lect reve t reverse ge rse gear, pu ar, push the l sh the leve ever r
back. back.
Travel is released in the same way as for the standard version ((see "Travel" in Travel is released in the same way as for the standard version ((see "Travel" in
cha
chapte pterr 4.5 4.5)). )).
https://www.besttruckmanuals.com/