Jungheinrich DFG 540, Руководство по эксплуатации

Страница: 72 / 171

72 72
0 0
8 8
. .
1 1
2 2
E E
N N
4 4..5 5 T Trra av ve ell
WARNING! WARNING!
Improper travel can result in accidents Improper travel can result in accidents
 
Do not get up from the driver’s seat during travel. Do not get up from the driver’s seat during travel.
 
Do not drive the truck unless your are wearing a seat belt and the panels and doors Do not drive the truck unless your are wearing a seat belt and the panels and doors
are properly locked.
are properly locked.
 
Make sure that the travel area Make sure that the travel area is clear. is clear.
  Adapt the travel speed to the conditions of the route, the work area and the load. Adapt the travel speed to the conditions of the route, the work area and the load.
 
Tilt the mast back and raise Tilt the mast back and raise the fork carriage approx. 200 mm. the fork carriage approx. 200 mm.
 
Make sure you have enough visibility when reversing. Make sure you have enough visibility when reversing.
Travel Travel
Requirements Requirements
– – Truck Truck prepared prepared for for operation, operation, (see (see
"Preparing the truck for operation" on "Preparing the truck for operation" on
pa
page ge 68 68). ).
Procedure Procedure
•• Rel Releas ease t e the he par parkin king b g brak rake. e.
•• Choos Choose the e the travel travel direct direction w ion with t ith the tr he travel avel
direction switch (71). direction switch (71).
NOTE NOTE
Only change direction when the truck has Only change direction when the truck has
stopped.
stopped.
•• To se To selec lect the f t the forw orward g ard gear ear, pus , push the h the
switch forward. switch forward.
•• To sel To select th ect the reve e reverse ge rse gear, pu ar, pull the ll the switch switch back. back.
•• Rai Raise the f se the fork ca ork carri rriage ap age appro prox. 200 m x. 200 mm. m.
•• Ti Tilt lt th the m e mas ast b t bac ack. k.
•• Apply the ac Apply the accelera celerator pedal (69 tor pedal (69). The trave ). The travel speed is gover l speed is governed by the accel ned by the accelerator erator
(69). (69).
The truck travels in the direction selected. The truck travels in the direction selected.
Neutral locking Neutral locking
If the driver leaves the truck without taking it out of gear, the truck will automatically If the driver leaves the truck without taking it out of gear, the truck will automatically
be set to neutral. To resume travel (sitting on the truck) all controls must be
be set to neutral. To resume travel (sitting on the truck) all controls must be
deactivated, the travel direction switch must be set to neutral “N” and then the
deactivated, the travel direction switch must be set to neutral “N” and then the
required direction selected.
required direction selected.
69 69
71 71
https://www.besttruckmanuals.com/