digital audio
modular
processing system
C8000
4/8/16 channels DSP with SDI & system-bus I/O
C8492(B)
page
9/30
Save as #
Select a preset NV memory number.
Name
Assign the preset a name (up to 16 digits).
and press <SAVE>.
The check boxes define which part will be stored (Input Bus
Routing in the example above) when you press <SAVE> next time.
Failover/Upmix
The third group (#33 … #40) is intended for fail over and upmix
parameters.
Load
Select a preset by name and press <LOAD>.
Loaded from preset
The soft LEDs show the Fail Over circuit(s) controlled by the preset
currently loaded:
I.e. a preset may change the parameters for one 2ch fail over
without changing the parameters for another one.
Save as #
Select a preset NV memory number.
Name
Assign the preset a name (up to 16 digits).
and press <SAVE>.
Processing blocks
The check box(es) define from which processing block parameters
stored in preset
will be stored next:
The number of processing blocks involved depend on the operating
mode for the DSPs.
Preset Clipboard
<COPY TO CLIPBOARD> copies the active preset to a clip board,
the data may be used by other modules inside the same frame.
Backup Presets to File
<BACKUP> creates a backup XML file which may be saved
on a PC.
Restore Presets from File
<Browse… > opens a file dialog to select a previously stored
preset file. <RESTORE> will upload the file and overwrite existing
presets for this module.
