digital audio
modular
processing system
C8000
4/8/16 channels DSP with SDI & system-bus I/O
C8492(B)
page
27/30
SDI Grx Enable
You must check these check boxes to enable the respective
embedder. The check boxes show flashing red frames as a warning
as long as no embedder is turned on. The respective column of the
local (embedder) routing matrix for each group is not high lighted as
long as its embedder is not enabled.
Delay
[0 … 340 ms]
Before the signals are embedded you may engage a delay per mono
channel.
Silence
Mutes the respective audio channel at the embedder side.
Transparent
[ON / OFF]
Status Bits
You can decide whether the AES Channel Status Bits are taken
(transparent) from their source or if you want to generate new ones:
Format
: Professional
Audio Mode
: Audio
Emphasis
: None
Freq. Mode
: Locked
Sample Freq.
: 48kHz
Channel Mode
: Not Indicated
User Bits
: None
Auxiliary Bits
: 24Bit
Audio Word Length : Not indicated
If the embedder detects a non audio signal it will set the "Audio Mode"
to "Other" (non audio) and set the validity bit for the AES stream.
