digital audio
modular
processing system
C8000
4/8/16 channels DSP with SDI & system-bus I/O
C8492(B)
page
18/30
Proc Status Enable
[ON / OFF]
If the average gain of the module is equal or above the
Leveler Max Gain for more than 10s the respective
Processing Status soft LED turns red. This status information is
condensed for all processing channels by the module controller.
The frame controller will condense the status information for all
processing modules within a frame and may generate a SNMP
trap and/or fire a GPO. In this case the SNMP manager may poll
the frame for details to “see” which processing channel sticks.
Bit Transparent
[off / on]
indicates that a channel pair is in bit transparent mode
to let non audio signals pass through without the DSP processing
to maintain data structure for non audio signals.
Expert
[show / don't show]
The expert mode offers the possibility for manual intervention of the
adaptive behavior of the LevelMagic process for critical material.
For details pls. see the above mentioned document.
Clear Processing History manually or GPI controlled
(Preset)
[disable / enable]
defines if the switch is included in a preset. This allows clearing the
processing history if a preset is loaded.
Initial Dynamic Gain (dB) [-40 … 1 … 15]
Start value for the LevelMagic process after Clear Processing
History.
AGC Recovery
[normal / fast]
Low Level Behavior
Processing Threshold
[-80 … -70 … -20]
(dBFS)
The threshold from where the processing gain will behave as
defined by Below Threshold Mode.
Below Threshold Mode
[release, hold]
returns slowly to 0 dB gain change or stays at the Processing
Threshold.
