JUKI DDL-8000A, Руководство инженера

Страница: 31 / 173

– 18 –
Adjustment Procedure Results of Improper Adjustment
1. The front and rear positions of the inner hook presser ❶ can be
adjusted by means of the setscrew ❷ .
[Standard adjusting value]
Fasten the needle entry section by means of the setscrew
❷ so
that it is located closer to the shoulder section toward the front side
from the center of the convex section of the inner hook presser
❶ .
(Caution) When adjusting the hook shaft position, make sure of
the plunger movement without fail (the bobbing mo-
tion).
○ If the convex section of the inner
hook presser ❶ has any flaw, this
can be a cause of thread breakage
or uneven sewing.
In such a case, the damaged part
shall be replaced with a new one.
○ If the inner hook presser ❶ is
positioned inadequately, an extra
tension is exerted when the thread
comes out of the convex section.
This can be a cause of shrinkage
errors.