JUKI DDL-8000A, Руководство инженера

Страница: 102 / 173

– 89 –
5. Function setting list
(1) Function setting list
Table 1.
No. Item Description Setting range Setting
levle
Default
P01 Maximum sewing
speed
The maximum sewing speed reached by fully depressing the pedal is set with
this function setting item. The maximum sewing speed can be changed within
the sewing speed range specified for [P68 Maximum sewing speed].
* The maximum sewing speed can also be changed using the + - switch
on the operation panel.
100 to [P68]
（ sti/min ）
U
MS : 4000
SH : 3500
P02 Tilt of the pedal Change in the sewing speed with respect to the depressing depth of the pedal
is set with this function setting item.
The sewing speed is increased abruptly when this parameter is set to a large
value, or increased slowly when this parameter is set to a small value.
10 to 100
（
%
）
S 80
P04 Reverse feed
stitching speed at
the beginning of
sewing
The sewing speed to be used during the reverse feed stitching at the
beginning of sewing is set with this function setting item. 100 to 3000
(sti/min)
U 1900
P05 Reverse feed
stitching speed at
the end of sewing
The sewing speed to be used during the reverse feed stitching at the end of
sewing is set with this function setting item.
100 to 3000
(sti/min)
U 1900
P06 Overlapped stitching
speed
The sewing speed to be used during the overlapped stitching is set with this
function setting item.
* This speed can also be changed using the relevant switch on the
operation panel.
100 to 3000
(sti/min)
U 1900
*
P07 Sewing speed for
soft start
The sewing speed for soft start at the beginning of sewing is set with this
function setting item.
100 to 1500
(sti/min)
U 800
*
P08 Soft start function The number of stitches to be sewn with the soft-start function at the beginning
of sewing is set with this function setting item.
0 : The soft-start function is not selected
1 to 9 : The number of stitches to be sewn with the soft-start function
0 to 99
(Stitches)
U 1
P09 Sewing speed for
the polygonal-shape
stitching
Sewing speed for the polygona-shape stitching is set with this function setting
item.
* The sewing speed can also be changed using the + - switch on the
operation panel.
200 to [P68]
(sti/min)
U
MS : 4000
SH : 3500
P10 Setting of the
reverse feed
stitching at the end
of end of polygonal-
shape stitching
Whether the reverse feed stitching is automatically carried out at the end of
polygonal-shape stitching is set with this function setting item
ON : Reverse feed stitching is automatically performed at the end of
sewing
OFF : Sewing machine stops sewing before starting reverse feed stitching
at the end of sewing. It performs reverse feed stitching when the
front part of pedal is depressed.
ON/OFF U ON
P12 Changeover of
the reverse feed
stitching at the start
of sewing between
Auto / Manual
The sewing speed for the reverse feed stitching at the beginning of sewing is
set with this function setting item.
0 : The reverse feed stitching is performed by manually operating the
pedal.
1 : The reverse feed stitching is performed at the sewing speed set with [P04
Reverse feed stitching speed at the beginning of sewing].
0 to 1
(–)
U 1
* P13 Function of stop
immediately after
the reverse feed
stitching at the
beginning of sewing
Operation to be carried out at the end of the reverse feed stitching at the
beginning of sewing is selected with this function setting item.
CON : The sewing machine does not stop temporarily after completion of
the reverse feed stitching at the beginning of sewing
STP : The sewing machine stops temporarily after completion of the
reverse feed stitching at the beginning of sewing
CON/STP U CON
* P15 Changeover of the
needle up/down
correction function
The function of needle up/down correction switch is changed over with this
function setting item.
0 : Needle up/down correction
1 : One stitch correction
2 : Continuous half stitch
3 : Continuous one stitch
0 to 3
(–)
U 0
P16 Limited speed during
the reverse feed
stitching on the way
Limited speed in the case of carrying out the reverse feed stitching operation
is set with this function setting item.
0 : No speed limit
10 to 3000 : Sewing is performed at the set sewing speed
100 to 4000
(sti/min)
S 2000
* P18 Correction of
solenoid-on timing
for the reverse feed
stitching at the
beginning of sewing
Stitch alignment can be carried out by changing the timing of actuating the
reverse-feed stitching solenoid at the time of reverse feed stitching at the
beginning of sewing. When the set value for this parameter is increased, the
length of stitch at the end of A process is increased and the length of stitch at
the beginning of B process is decreased.
0 to 200
(°)
U 123
* P19 Correction of
solenoid-off timing
for the reverse feed
stitching at the
beginning of sewing
Stitch alignment can be carried out by changing the timing of releasing the
reverse-feed stitching solenoid at the time of reverse feed stitching at the
beginning of sewing. When the set value for this parameter is increased, the
length of stitch at the beginning of B process is increased.
0 to 200
(degree)
U 130
P21 Position to depress
the front part of
pedal (sewing start
position)
Start position of sewing by operating the pedal is set with this function setting
item. 30 to 1000
(–)
S 520
P22 Pedal freeing
position
Releasing position of pedal operation is set with this function setting item. 30 to 1000
(–)
S 420
＊
Supplementary explanation is added in 4.-(2) Further information about memory switch.
◎
These data are stored in the main board in the control box. Data other than these data are stored in the panel board in the panel.