JUKI DDL-8000A, Руководство инженера

Страница: 132 / 173

– 119 –
(5) Initialize
All the data (including the set data for F1 and F2 of the panel and polygonal-shape stitching data) other than
P72, P73, P123, J4 will be initialized.
1) Activate the memory switch No. P70.
(Refer to "4.-(3) Head selection" [Memory switch No. P70].)
2) Select a different head and select the head again.
Example) When two heads are selected
Change “2” to “3”, press put back “3” to “2”, and press .
(6) Memory switch data reset
Once the memory switch data that you arbitrarily changed is memorized, the memorized data can be
restored any number of times until initialization is conducted.
1) Activate the memory switch in the user level.
(Refer to "4.-(2)-[1] User level".)
2-1) Hold down
⓭
for 3 seconds on the
mode screen, and all the function setting data
can be memorized and "SAVE" is displayed on
the screen for a moment.
2-2) Hold down ⓫ for 6 seconds in the normal
sewing state, the data initialization confirmation
screen is displayed.
3) Press
❽
, and the memory switch data
memorized in the step 2-1) is reset and the
normal sewing state is restored.
⓬
A B
❽
⓫
⓭