− 73 −
No.
Item
Setting range
/
Edit unit
Initial value
Center knife lowering time
Center knife lowering time is set.
10 to 100
/
1
40
Center knife one-shot motion prohibition setting
With/without one-shot motion to properly cut the cutting position of cen-
ter knife on the side of the end of sewing is selected.
- - -
With one-shot
motion
One-shot motion
prohibited
Clamp foot motor origin compensation
Origin of clamp foot motor is compensated.
−10.0 to
10.0
/
0.1mm
0.0mm
Corner knife motor origin compensation
Origin of corner knife motor is compensated.
−5.0 to 5.0
/
0.1mm
0.0mm
Marking light origin compensation (just under)
Origin of marking light motor is compensated. Origin is in the state that
it irradiates light just under and located at the position of 230 mm from
needle.
−500 to
500
/
1 pulse
0 pulse
Marking light origin compensation (needle side)
Position of needle side from origin of marking light motor is compensat-
ed. Light irradiation position is 80 mm from needle.
−500 to
500
/
1 pulse
0 pulse
Marking light origin compensation (operator side)
Position of operator side from origin of marking light motor is compen-
sated. Light irradiation position is 380 mm from needle.
−500 to
500
/
1 pulse
0 pulse
Back tack motor origin compensation
Origin of back tack motor is compensated.
−30 to 30
/
1 pulse
0 pulse